Setting Up The Tv With Your Pc - Samsung 6 Série Mode D'emploi

Setting up the tV with your PC

➣
Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ENtER
2. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER
. When you are satisied with your setting, press the ENtER
button.
. Press the EXIt button to exit.
♦
Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Easy Setting
1. Press the tOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the ENtER
♦
Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (coarse) and Fine-
tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then press
the ENtER button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENtER
Position
Adjust the PC's screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENtER
Image Reset
You can replace all image settings with the factory default
values.
button, to select "Picture".
button.
button.
button.
button.
English - 
tV
Picture
Mode : Standard
backlight
Contrast
brightness
Sharpness
Auto Adjustment
Screen Adjustment
Detailed Settings sMore
Move Enter
Auto Adjustment in progress
Please wait.
tools
Anynet+ (hDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep timer : Off
SRS tS Xt : Off
Energy Saving : Off
PIP
Auto Adjustment
Move Enter
tV
Screen Adjustment
Coarse
Fine
Position
Image Reset
Move Enter
tV
Position
Move Enter
tV
Screen Adjustment
Coarse
Fine
Position
Image Reset
Move Enter





0


Return
e Exit
0



Return
Return
0
 

Return