General Functions - SBS Lady Bug Mode D'emploi

UK
INTRODUCTION
Thank you for purchasing the Bluetooth® SBS headset. This guide
will help you make the most of this headset.
CONNECTION
To connect the headset to the phone, press and hold the
multifunction key for about 5-8 seconds, or until the LED indicator
blinks with alternate blue and red lights. The headset will
automatically connect to the previously connected smartphone.
When connecting for the first time, activate the Bluetooth® search
on the smartphone and select SBS LADYBUG from the available
devices list.
If required, enter the password 0000.
Connecting a second device:
After successfully connecting the first smartphone, turn it off
and initiate the second phone connection following the same
instructions as the first one.
Turn on the first phone, search for it in the Bluetooth® device list
and select it. Now the headset is connected to both phones.

GENERAL FUNCTIONS

Power On: Press and hold the multifunction key for 4 seconds, the
LED indicator will turn blue for a second.
Power Off: Press and hold the multifunction key for 4 seconds, the
LED indicator will flash red for 2 seconds.
Answer a call: when a call comes in, the LED indicator blinks blue.
Press the multifunction key to answer.
End a call: During the call, press the multifunction key.
Last number recall: With the headset in standby mode, press the
multifunction key twice.
Reject a call: When a call comes in, the LED indicator blinks blue.
Press and hold the multifunction key for one second.
Mute yes/no: During a call, press the multifunction key twice.
Switch between headset and phone: during a call, press and hold
for 1 second.
4