Pneumatic Connections; Important - Lacme UNIVERSAIR EVOLUTION Manuel D'utilisation Et Consignes De Sécurité

Masquer les pouces

Table des Matières

Les langues disponibles

Compressor turns but does not load

This may be due to the breakage of the valves or of the gasket.

Replace the damaged part.

Compressor no starting

If the compressor has trouble starting, check the following:

- Does mains power match that of the data-plate?

- Are power cable extensions of adequate diameter or length?

- Is the work environment too cold? (under 0°C)

- Is there oil in the housing to ensure lubrication?

- Is power supplied to the electrical line?

Compressor not stopping

- If the compressor does not stop when maximum pressure is

reached, the tank safety valve comes into operation. To repair

the valve, contact your nearest service centre.

IMPORTANT

- Do not on any account unscrew any connection while the tank is

pressurised – always check if the tank is pressure free,

- Do not drill holes, weld or purposely deform the compressed air

tank,

- Do not do any jobs on the compressor unless you have

disconnected the power plug,

- Temperature in operating ambient: 0°C +35°C,

- Do not aim jets of water or inflammable liquids on the

compressor,

- Do not place inflammable objects near the compressor,

- During down-times, turn the pressure switch to position "0"

(OFF),

- Never aim the air jet at people or animals,

- Do not transport the compressor while the tank is pressurised,

- Be careful with regard to some parts of the compressor such as

the head and delivery tubes, as they can reach high

temperatures. Do not touch these parts to avoid burns.

- Transport the compressor, lifting or pulling it with the

appropriate grips or handles.

- Keep children and animals well away from the machine

operating area.

- If using the compressor for painting:

a) Do not work in closed environments or near to naked flames

b) Make sure there is adequate exchange of air at the place of

work

c) Protect your nose and mouth with an appropriate mask.

- If the electrical cable or plug are damaged, do not use the

compressor

and contact an authorised service centre to replace the faulty

element with an original spare part.

- If the compressor is located on a shelf or on a top above floor

height, it must be secured to prevent it falling while in operation.

- Do not put objects or your hands inside the protective grilles to

avoid injury to yourself or damaging the compressor.

- Do not use the compressor as a blunt object toward things or

animals, to avoid serious damage.

- When you have finished using the compressor, always remove

the plug from the power socket.

For

the

European

market,

manufactured to meet Directive CE87/404

Sound pressure level

97 dB LwA guaranteed

86.5 dB LpA

The level of acoustic pressure can increase from 1 to 10 dB(A)

according to the place in which the compressor is installed.

HINTS FOR EFFICIENT OPERATION

- For efficient operation of the machine at full continuing load and

at maximum operating pressure, make sure the temperature of

the work environment indoors does not exceed +35°C,

- We advise you to use the compressor at 70% maximum duty

per hour at full load as this ensures efficient operation of the

product long-term.

STORING THE PACKED AND UNPACKED COMPRESSOR

For the whole time that the compressor is not used before

unpacking it, store it in a dry place at a temperature between

+0°C and + 35°C and sheltered away from weather.

the

compressor

tanks

are

For the whole time that the compressor is not used after

unpacking it, while waiting to start it up or due to production

stoppages, place sheets over it to protect it from dust, which may

settle on the components. The oil is to be replaced and the

operational efficiency of the compressor is to be checked if it is

not used for long periods.