Kasanova PRO KIV000019NOC Manuel D'instruction page 22

2 IN 1 CORDLESS VACUUM CLEANER
22
INSTALLATION OF CREVICE NOZZLE
• As shown in the figure, align the crevice nozzle to the machine
body connector, and push it gently. The installation is finished
when a "click" is heard (for disassembly, just press the lock button
showed in the figure and pull it downward).
REMOVAL AND INSTALLATION OF DUST CUP
Remove the dust cup from machine body: Push the push button
under the machine body forward, and the dust cup assembly will pop
up. Then rotate the dust cup assembly anticlockwise to take down the
dust cup
START OF CLEANER
After installing all the parts, turn on the switch button at the handle to
start the cleaner (button in the figure)