Location Of Controls - Tokai LAR-11 Manuel D'utilisation

4. LOCATION OF CONTROLS

2
17
7
16
1. POWER /MODE
2. Preset 1/ PLAY - PAUSE
3. VOLUME knob
4. PRESET 2/INTRO
5. Preset 3 / Touche REPETITION
6. BAND / AMS
7. LCD DISPLAY
8. USB compatible Port
9. SD SLOT
5. FUNCTIONS OF THE CONTROLS
1. POWER /MODE
Press the POWER button to turn on the unit. When the
unit is power on, press and hold the power button for
more than 0.5 seconds, the unit goes into power off
mode. When the unit is on, press the POWER/MODE
button to change among RADIO, USB (when an USB stick
is inserted), SD (when an SD memory card is inserted) and
AUX mode.
2. Preset 1/ PLAY-PAUSE
a) In Radio mode
Press briefly to recall the station programmed in 1st
position on the current frequency band.
If one of these buttons is pressed for more than 2 seconds,
the current playing radio station will be memorized into
the selected preset button.
b) In SD/USB mode
Press button briefly to interrupt the playback of SD
or USB. Press again to resume normal playback.
3 4 5
15 14
13
3
7
6
12
10. RESET
11. AUX IN
12. MUTE
13. CLOCK
14. +10 / Preset 6
15. -10 / Preset 5
16. Preset 4 /RANDOM
17. TUNE/SEEK /SKIP FORWARD - BACKWARD
3. VOLUME
Turn the VOLUME knob to increase or decrease the
volume.
4.
Successively press the VOLUME knob to access the
following audio settings:
BALANCE FADER  EQUALIZER (EQ OFF -
FLAT-POP-ROCK-CLASS)  LOUDNESS (ON/OFF)  LOC
(ON/OFF)  STEREO/MONOVOLUME; then turn the
VOLUME knob to adjust.
3. PRESET 2/INTRO
a) In Radio mode
Press briefly to recall the station programmed in 5
position on the current frequency band.
b) In SD/USB mode
Press the INT button to sample the first 10 seconds part
of each track, and the INTRO will be visible on the LCD
display. In the process of INT, press INT button again to
stop sampling and to continue playing the current track.
8
1
8
9
10
0
11
th