How To Use As A Multimedia Player; Device Connection - Phonocar VM 006 Notice De Montage Et D'emploi

How to use as a Multimedia Player

Device connection

There are 2 video output for the product: CVBS out and VGA, CVBS can be connect to TV, and the VGA
connect to Computer monitor.
Please notice: please don't turn on the power until all connection is ready.
Connect to TV
• Please insert HDD/Memory Card/ USB Drive into the PLAYER
• Connect the PLAYER to TV with AV cable
• Connect the PLAYER to Power with power cable and adaptor
• Turn on the PLAYER. Please choose the correct TV AV channel for the Video input, then, it will be show
INITIALIZING, after some seconds, it will show the MENU. Then you can start to choose and play the fi les
you like.
Connect to computer monitor
• Connect the PLAYER with Monitor via the VGA cable
• Turn on the Monitor.
• Turn on the PLAYER, and press the VGA/AV button on the PLAYER Remote Controller to switch to VGA
video output mode. And it will show INITIALIZING, after some seconds, it will show the MENU. Then you can
start to choose and play the fi les you like.
22