Working Notes; Disposal Information - WOLFF LS35 Traduction Du Mode D'emploi Original

EN
7.0 Troubleshooting
Fault Possible cause
The machine charging the
does not start battery
Higher exer- Saw Blade
tion of force blunt
required while
working
high vibration Wear parts of
the machine are
knocked out

8.0 Disposal information

Disposal
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household
waste! According the European Guideline
2002/96/EC for Waste Electrical and Elect-
ronic Equipment and its implementation into
national right, power tools that are no longer
usable must be collected separately and disposed of in an
environmentally correct manner.
Warning
Subject to change without notice
19
9.0 Notes on various fl oor coverings
Remedy
Charge bat-
► Do not load the power tool in this way
tery in station
The main fi eld of application of the battery strip
cutter 18V is the cutting of linoleum, PVC, lino
Replace Saw
and vinyl.
Blade
Send in the ma-
chine for repair

Working notes

strong that it comes to a standstill.