Eneo EDC-AKS1 Mode D'emploi page 22

6. After assembling the housing to the socket (5), tighten the knocking screw by 4mm L-wrench.
NOTE: The range of the operating temperature of this unit is -40°C ~ +50°C. Therefore, don't expose
this unit directly to the sun and install it at a well ventilated place so that the inside temperature
may not increase more.
Mounting accessories
N0. Part Name
1
Plastic anchor
2
Screw
3
Screw
4 Cable clamp
5 PG gland *
6
L-wrench
7
L-Torx wrench
8
Screw
9
Washer (star)
* To be removed when using a # 7443/ 7444 connection cable.
Description
BHS M4, L=
PTS M6, L=35
BHS M3, L=
4N, Nylon
6.0
4mm
T0, 5mm-Typ
BHS M4, L=
M4

Q'ty
4
4