Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

globalindustrial.ca
User's manual
Customer Service
US: 1-800-645-2986
OPERATING INSTRUCTIONS
TO ADJUST AIRFLOW UPWARD OR DOWNWARD:
the desired angle. This high velocity fan can be used alone or in conjunction with
air conditioning. Rotating the fan head upward serves to pull air from the floor
and circulate it throughout the entire room.
SPEED CONTROL:
For stationary operation select fan speed by turning the
switch to the left to either High (3) - Medium (2) - Low(1). 0 is off position.
SIZE
VOLT
24"
120V
Manual del usuario
Servicio de atención al Cliente
México: 01.800.681.6940
AMP
WATT
1.8A
200W
Distribucion Industrial Globales S DE RL DE CF
24 Inch Internal Orbital
Pedestal Fan
Model 292606
READ & SAVE THESE
INSTRUCTIONS
CAUTION:
Read and follow all instructions before operating fan.
Do not use fan if any part is damaged or missing.
WARNING:
• To reduce the risk of fire or electrical shock, do not expose to
water or rain.
• To reduce the risk of fire or electrical shock, do not use this fan
with any solid state speed control device.
• To reduce the risk of injury, disconnect
from power supply before servicing.
• If the power supply cord is damaged, contact a qualified service
center electrician to install an appropriate replacement cord.
• The appliance is not intended for use in locations where special
conditions prevail, such as the presence of a corrosive or
explosive atmosphere (dust, vapor or gas ).
• This appliance must be used safely and with supervision.
Keep away from children or unauthorized users. Never leave
unattended.
• This fan should not be operated outside.
CLEANING:
WARNING:
Unplug from electrical supply source before
cleaning.
1. Use soft damp cloth to clean, then wipe with dry cloth.
2. Do not use a cleaning solution that is harmful to paints or
plastics.
Tilt fan head to
INTERNAL ORBITAL FUNCTION:
The blade will orbit internally in this
mode while the fan is running at any
speed. Turn the switch to right to either
High (3) - Medium (2) - Low(1).
0 is off position.
SPEED
RPM
3
1095/965/840
1
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
CFM
7755
HP
1/8
052416

Publicité

loading

Sommaire des Matières pour Global Industrial 292606

  • Page 1 Service à la clientèle México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 24 Inch Internal Orbital Pedestal Fan Model 292606 READ & SAVE THESE INSTRUCTIONS CAUTION: Read and follow all instructions before operating fan. Do not use fan if any part is damaged or missing.
  • Page 2 Assembly Instructions 24 Inch Internal Orbital Pedestal Fan CONTENTS Ref. Qty. Description Shaft Assembly Spring Base Motor Head Assembly M6 x 1.0 x 12mm Lg. Hex Phillips Serrated Flange Nut M8 x 1.25 x12mm Lg. Hex Phillips Serrated Flange Nut Plain Washer Knob H4 H3...
  • Page 3 México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 Ventilador Orbital interno de 24 pulgadas Modelo 292606 LEA Y GUARDE ESTAS INSTRUCCIONES PRECAUCIÓN: Lea y siga las instrucciones antes de operar el abanico. No use el abanico alguna parte está dañada o perdida.
  • Page 4: Instrucciones De Ensamblaje

    Instrucciones de Ensamblaje Ventilador Orbital interno de 24 pulgadas CONTENIDO Ref. Cant. Descripción Conjunto de Ejes Resorte Base Conjunto de Cabeza del Motor Tuerca Serrada Hex Phillips de M6 x 1.0 x 12mm Lg. Tuerca Serrada Hex Phillips de M8 x 1.25 x12mm Lg. Arandela Plana Perilla H4 H3...
  • Page 5 México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 Souffleur orbital interne avec piédestal de 24 pouces Modèle 292606 LIRE ET CONSERVER CES DIRECTIVES MISE EN GARDE : Lire et suivre toutes les instructions avant de faire fonctionner le ventilateur. Ne pas utiliser si une pièce quelconque du ventilateur est endommagée ou manquante.
  • Page 6: Directives D'assemblage

    Directives d’assemblage Souffleur orbital interne avec piédestal de 24 pouces CONTENU Réf. Qté. Description Assemblage de l'arbre Printemps Base Assemblage de la tête du moteur M6 x 1,0 x 12mm LG. Hex Écrou cruciforme à embase dentelé M6 x 1,0 x 12mm LG. Hex Écrou cruciforme à...