Publicité
Les langues disponibles
Les langues disponibles
Care and Maintenance
This product has been designed for many years of problem-free
operation. There are however, a few simple things that you can do to
enhance the life of your fan:
1. Keep the air vents clear and free of dirt. These vents are necessary
to keep the motor cool while in use. Unplug the fan, and use a
vacuum to remove dirt from vents.
2. Although this product has self-
lubricating bearings, after many years
of use these can dry out and clog with
dust. Should this happen, your fan will
begin to run slower, louder and may
seize-up. To prevent this, unplug the fan,
blow out and lubricate the front bearings
where indicated in the diagram beside.
Use a light machine oil.
The front bearing is easily oiled by
turning the fan so that the shaft is
vertical with the blade facing upwards.
Remove the blade by fi rmly pulling
it straight off the shaft. Apply a couple
of drops of oil onto the shaft, as close
to the bearing as possible, and leave
adequate time for the oil to penetrate
the bearing. Clean the shaft thoroughly
before replacing the blade.
Caution! Keep out of the reach of children.
Specifi cations
120 volts, 60 Hz, 0.35 Amps
6 ft. cord (1.83 m)
Publicité
