DeLOCK USB 2.0 Video Grabber Manuel D'utilisation page 3

Driver Installation
1. Switch on your computer.
2. Connect the USB cable of the adapter with an available USB port of your
computer.
3. The assistant for the Software Installation will appear.
4. Click on "Cancel".
5. Put the driver CD in the CD ROM drive.
6. Setup Program will open automatically.
7. Choose "Driver Install". Click on "Next".
8. Click "Install". When driver is located, click "Continue installation".
9. Click "Software Install".
10. Choose your language and click "OK".
11. Please make sure DirextX9.0 installed before application installation. If not,
system will prompt install it automatically.
12. Click each time on "Next".
13. Your computer will ask to reboot. Click on "Finish".
14. After restart you need to install the Honestech Software.
15. Click on "Honestech VHS to DVD".
16. Choose your language and click "Next".
17. Click on "Next".
18. Read the license agreement and confirm it by "I accept the terms in the
license agreement" and click on "Next".
19. Choose "Install the components", and click on "Next".
20. Click on "Next".
21. Click on "Finish".
22. You can now start to use the device.
Using the device
1. On your desktop you will find now the icons EZ Grabber and honestech VHS.
2. As soon as you connect a device to the Video Grabber, you can start to edit
the movie immediately by using the software.
- -