Archos 50 Diamond Mode D'emploi page 11

EN
WiFi connection
WARNING: Make sure that you are in a WiFi zone. You can access the WiFi
settings quickly from the status bar.
1. Touch and hold the time & battery icons to reveal
the status bar.
2. Pull the blue line down to display the status
dashboard.
3. Touch the status dashboard icon .
4. Touch the "Settings" icon to open the settings
menu.
5. In the "Wireless & networks"section, if the WiFi is
off, slide the WiFi switch to the "ON" position. Once
the WiFi is on, the ARCHOS will scan for WiFi networks
in range.
6. Touch "WiFi" to display available networks.
7. Touch the name of network you want to connect to.
Private networks are shown with a lock icon and will require you to enter
your password.
11
ARCHOS_50_Diamond_book.indd 11 26/01/2015 12:10:53