Eaton Tripp-Lite SmartOnline Série Manuel De L'utilisateur page 4

Mounting (Tower)
The transformer module can be mounted in an upright tower position when used with optional base stands, sold separately by Tripp Lite
(model #: 2-9USTAND). When installing a transformer module, place it between the power module and the battery module.
Transformer modules are extremely heavy! Use caution while lifting and mounting! User must properly
Features (Rear Panel)
Before installing and operating your transformer module, familiarize yourself with the location and function of its features.
3
3
1
AC Output Receptacles: Accepts direct plug-in connection of NEMA 5-15P or NEMA 5-20P equipment plugs.
2
AC Outlet Receptacle: Accepts direct plug-in connection of L6-30R equipment plugs.
3
AC Output Breakers: Push-button breakers control output power to transformer module's AC Output Receptacles, which are
directly adjacent.
4
Overtemperature Reset Breaker: Trips if the transformer's temperature climbs too high. To reset the breaker, reduce the load and
allow the unit to cool for at least 30 minutes. After 30 minutes, press the breaker button.
5
Input Power Cord: Plugs into L6-30R receptacle.
stabilize the module while lifting and mounting!
1
WARNING!
3
2
4
1
4
5