Presentation - Audiophony PA WP8 Guide De L'utilisateur

English

2 - Presentation

1
ON LED
This LED indicates that the WP8 is
powered, therefore connected to a
matrix itself powered.
2
Selector
Select the source for which you want to
adjust the level.
This requires that the WALL CTRL
button for the area concerned is active
on the matrix.
3
Level potentiometer
Ce potentiomètre gère le niveau de la
source sélectionnée.
This requires that the WALL CTRL
button for the area concerned is active
on the matrix.
4
MIC/LINE ACTIVE button
Enables the local input sources (MIC
and LINE) to be activated.
5
MIC VOL potentiometer
This potentiometer controls the level of the microphone input.
6
Potentiomètre LINE VOL
This potentiometer controls the level of the line input.
7
Mic input
Balanced XLR plug.
8
Input line
Stereo RCA plug.
Notes:
- The connection between WP8 and the matrix is made
via cat 6 RJ45 cable with a maximum length of 200m.
- The WP8 is compatible with standard double-station
flush-mounted boxes.
WP8 - Source selector for matrix with microphone and line inputs
1
ON
2
SELECT
BGM 1
BGM 2
BGM 3
BGM 4
4
5
MIC
0 10
VOL
7
MIC
AUDIO IN & SOURCE SELECTOR
3
0 VOL 10
BGM 5
BGM 6
BGM 7
BGM 8
MIC/LINE ACTIVE
6
LINE
0 10
VOL
8
LINE