Tydom Application; Delete The Camera - DELTA DORE Tycam 1100 Guide D'installation

Bitrate
The resolution of the camera is automatically adjusted according to the
available bit rate.
If you have difficulty connecting remotely, you can change the resolution of
your camera in the app. This setting can only be accessed remotely.
The router requires 100 kbit/s for
its own operation.

8 - Tydom application

Switching on for the first time
• When switching the camera on for the first time or after deleting the
camera, the time needed to set up the connection with the secure server
is around 2 minutes. It can take up to 7 minutes if a software update is
required.

9 - Delete the camera

To remove the camera from the system, launch the Tydom application.
Menu> My devices> Camera> Delete
28
Associate your camera with the Tydom application, making sure
that your smartphone or tablet is connected to the local network.
Run the Tydom application and follow the instructions.
You can associate up to 8 cameras.
Setting the Upstream rate
resolution used by camera
High
Average
Low
900 kbit/s
450 kbit/s
300 kbit/s