Blueair Healthprotect - Blueair HealthProtect 7400 Serie Manuel Utilisateur

Blueair HealthProtect™

Blueair HealthProtect™ air purifiers are available in three models, the 10-models, the
40-models and the 70-models. All models are Wi-Fi enabled, have a GermShield
prevent bacterial growth, pre-filters and a main filter to purify air.
All HealthProtect™ models have control functions and built in sensors. The 40-models and
the 70-models have additional indications for air quality data. The 40-models have a display
for particulate matter data. The 70-models have a dynamic screen control, with additional
functions for particles, gases (tVOC), temperature, relative humidity and filter lifetime.
You can change the air purifier settings at any time, using the control panel on the air purifier
or remotely using the Blueair app. Additional functions are available for all models through the
Blueair app.
Recommendations for best performance
•
Use the air purifier in a room that does not exceed the room size recommendation.
•
Place the air purifier in a location where air can circulate freely in, out and around the air
purifier.
•
Do not place the air purifier closer than 10cm/4" to another object.
•
During operation, keep doors and windows in the room with the air purifier closed.
•
Run the air purifier 24 hours per day with the GermShield
•
Only use original Blueair filters.
•
Change the main filter when the filter replacement indicator appears on the control
panel.
•
Follow the maintenance instructions in this user manual.
Blueair air purifiers are mainly composed of a motor, a fan and a filter. The air purifier removes
contaminants from the air in a room to improve indoor air quality.
function on.
TM
6
function to
TM