Weka 651 A Notice De Montage, D'utilisation Et D'entretien page 8

Warranty claims must be accompanied by the original packing slip and the original sales receipt and must be
submitted within the warranty period in writing or by fax or e-mail. A further prerequisite for a claim is the
immediate notification of the defect or damage in the form of pictures and a written description of the defect.
Address all warranty claims to:
weka Holzbau GmbH, Johannesstraße 16, 17034 Neubrandenburg
Fax: 0395/42908-83; E-mail: info@weka-holzbau.com
Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau
GmbH will carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating
them with a wood protection agent, the delivery and assembly of accessories and accessory parts. Electrical
connections are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article
or the individual parts over a distance greater than 10 - 15 m or to another level is not included in the
assembly price quoted. The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 'Level tolerances in building construction',
tab. 3, row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations before
assembly begins. The substrates/floors/foundations constructed or selected by you must be suitable for the
assembly.
TOOL
You should have the following tools to hand before beginning assembly. (Not supplied.)
Spring tape measure Spirit level Pencil Mitre saw/hand disk saw Drill
Electric screwdriver Taper drill Screw clamp Spanner Silicone
= Entrance
The screw connections should be checked and retightened at regular intervals. This product is
manufactured primarily from solid wood and as wood is a natural product, prolonged weathering, in
particular after long hot periods, may lead to the formation of dry cracks. These dry cracks are in no
way a quality defect but a natural occurrence and, depending on the weather conditions, these cracks
may close up again to a minimum.
In addition, these dry cracks which appear along the grain of the wood have no effect on the stability and
durability of the material. In other words, the static properties are unaffected.
 Copyright HRB 3662
Technische Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
7