Hema Smart Fryer Mode D'emploi page 6

80.01.0104
TECHNICAL DATA
Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 1500W
PARTS DESCRIPTION
1. Air inlet
2. Temperature control knob
3. Power light
4. Working light
5. Timer / Power-on knob
6. Basket
7. Movable handle head
8. Basket release button
9. Basket handle
10. Oil catch pan
11. Air outlet
BEFORE USE
First read all instructions before use and retain the manual for later reference. Only plug this appliance into an
earthed socket. Before first use, remove the packing materials. Clean the basket and oil catch pan. (See
"CLEANING AND MAINTENANCE") Wipe inside and outside of the appliance with a soft cloth. Make sure that the
electrical parts remain dry. This appliance heats food at all directions and most of the ingredients do not need
any oil.
USE
1. Place the appliance on a dry, stable and heat-resistant surface.
Since the appliance becomes hot during use, make sure that it is not too close to other objects.
2. Pull out the basket and the oil catch pan from the appliance by the basket handle.
3. Place the ingredients into the basket. (Do not exceed the MAX level indicated inside the basket.) Slide the
basket and the oil catch pan into the appliance. Make sure they are placed correctly and closed completely.
Otherwise the appliance will not work. Caution: Never use the pan without basket in it. Do not touch the
pan during use or after use in short time as it gets very hot. Only hold the pan by the handle.
4. Connect the power plug to a suitable outlet.
5. Set the temperature control knob to the required temperature setting, which is suitable for what you are
frying. Consult the temperature table.
6. Turn the timer knob to choose the appropriate frying time and the appliance is switched on. For short frying
times, less than about 5 minutes, the button must first be rotated beyond 5 minutes to turn it back to the
right time.
7. The power light illuminates when the appliance is switched on. The working light comes on and goes out
from time to time during the hot air frying process. This indicates that the heating element is switched on
and off to maintain the set temperature.
8. When the cooking is finished, you will hear the timer bell rings. You can also switch off the appliance
manually by turning the timer knob to "00".
9. Pull out the basket and the oil catch pan from the appliance by the basket handle. Check if the ingredients
are ready. If not, simply slide the basket and pan back into the appliance and set the timer to a few extra
minutes.
- 5 -
EN