ForaCare IR21 Manuel De L'utilisateur page 19

Step 4
Read the result.
Release the button and read the
result. " " is shown together with
a temperature value and beeps.
NOTE
As the skin/surface scan temperature is likely to be affected by sweat,
oil and the surroundings, the reading shall be taken as a
If the probe is placed at an angle on the skin/surface scan, the reading
will be affected by surrounding temperature.
You can perform a skin/surface scan from 3 cm away.
Turn off the thermometer by pressing On / Memory button twice. Or
leave for 3 minutes after a temperature measurement, the thermometer
will automatically turn off.
If you need to take another reading, for the flashing "
before taking another measurement.
reference only.
" flashing
19