König Electronic DVR 400 Série Mode D'emploi page 9

Installation of the 16CH hard disk drive(s):
The 16CH DVR offers 2 options for hard disk installation. Both options can be used to 2TB.
1. Loosen the screws.
2. Remove the cover.
3. Detach the screws to remove the HDD bracket from the housing.
4. Attach the HDD to the bracket using the four supplied screws.
5. Attach the bracket back to the housing.
6. Connect the data and power cables to the HDD and the DVR.
7. Attach the cover and replace the screws back in place.
9