General Information; Validity Of The Operating Instruction; Extent Of Supply; Contact - oventrop Regudis W-HTF Notice D'utilisation

Flush-mounted cabinet
1.

General information

The original operating instructions were drafted in
German.
The operating instructions in other languages have
been translated from German.
1.1

Validity of the operating instruction

These operating instructions are valid for the
flush-mounted cabinets for the dwelling stations
Regudis.
1.2

Extent of supply

Please check your delivery for any damage caused
during transit and for completeness.
Items included in the delivery
• Flush-mounted cabinet
• Fixing material for the distributor/collector (only
Regudis model with surface heating distributor/
collector)
• Fixing material for the dwelling station
• Accessories for equipotential bonding
1.3

Contact

Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
Germany
Technical services
Phone: +49 (0) 29 62 82-234
1.4

Symbols used

Highlights important information and further
explanations.
f Action required
• List
1. Fixed order. Steps 1 to X.
2.
Result of action
Z
134117580-V01.09.2020
2.

Safety-related information

2.1

Normative directives

Observe the legal requirements applicable at the
installation location.
The current standards, rules and guidelines apply.
2.2

Correct use

Operating safety is only guaranteed if the product is
used correctly.
The flush-mounted cabinet serves the direct instal-
lation and protection of the dwelling station Regudis
W-HTU/Regudis W-HTF and its accessories.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer and/or
its authorised representatives due to damage caused
by incorrect use will not be accepted.
Observance of the operating instructions is part of
compliance with correct use.
2.3

Modifications to the product

Modifications to the product are not permitted. In
case of modifications to the product, the warranty
will become void. The manufacturer will not accept
liability for damage and breakdowns caused by mod-
ifications to the product.
2.4

Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possible consequences if the danger occurs
or the warning is ignored.
f Ways to avoid the danger.
The signal words identify the severity of the danger
arising from a situation.
DANGER
Indicates an imminent danger with high risk.
The situation will lead to death or serious
injury if not avoided.
NOTICE
Indicates a situation that may lead to damage
to property if not avoided.
General information
15