Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 3 « silent block » with steel spacer
- 2 plastic spacers Ø6 L : 10mm
- 2 BHc 5×30 screws (big head)
- 1 BHc 5×20 screw (big head)
Assembly
- Remove the original screen. Put in place the « silent bloc » on the provided screen (the metallic flange is
going outside the screen).
- Fix the screen on the motorcycle with the 5×20 screw on the lower point, and use both 5×30 screws on the
upper points, by inserting spacers between screen and its support.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
ERMAX SCREEN ADAPTABLE ON
MULTISTRADA 1260 / 950 2018 → ∞
Plastic spacers location
« CAUTION »
Update : 24/05/18
FITTING INSTRUCTIONS
MULTISTRADA 1200 2015/2017
EN
Publicité
