Firmware Update; Display Contrast - Burg Wächter secuENTRY ENTRY Pincode Guide De Montage

Reorganise
The use of this function is recommended when several users have been
deleted.
• Activate the keypad using the
• Then press FUNC, ‚Menu / Code Change' is displayed
• Scroll using the 2 key till reaching the ‚Administrator menu'
• Confirm with
• Scroll using the 2 key until reaching the "Setup" menu item
• Confirm with
• The "Reorganise" menu item appears
• Confirm with
• Enter the administrator code in order to acquire the authorisation for
programming
• "Reorganisation in progress" is displayed
Transmission power
The system or current consumption is optimised via the transmission power
and the wireless range of the cylinder and keyboard is expanded or reduced.
In delivery condition, a low transmission power is set in order to obtain
the longest possible battery life. The transmission power should only be
increased if repeated transmission problems occur. The setting does not
usually have to be adjusted.

Firmware update

The seuEntry keyboard can be sequentially updated via the Burg-Wächter
ConfigApp. Please refer to the instructions for the ConfigApp for the exact
procedure.

Display contrast

• Switch on the keypad using the key
• Then press FUNC – "Menu/Code Change" appears
• Scroll using the 2 key until the Administrator menu appears
• Confirm your selection using
• Scroll with the 2 key until "Setup" appears
• Confirm your selection using
• Scroll with the 2 key until "Display contrast" appears
• Confirm your selection using
• Select the desire contrast level using the 1 key (weaker)
or the 2 key (stronger)
Programming
You can input into the keypad a data set created with the PC software via
Programming.
The data set can be programmed using the PC software as well as the
secuENTRY ConfigApp.
• Switch on the keypad using the key
• Then press FUNC – "Menu/Code Change" appears
• Scroll using the 2 key until the Administrator menu appears
• Confirm your selection with
• Scroll with the 2 key until "Setup" appears
• Confirm your selection with
• Scroll with the 2 key until "Programming" appears
• Confirm your selection with
• Enter the administrator code in order to acquire the authorisation for
42 | English
key
secuENTRY