Grinding, Chopping Or Pureeing - ADE KA 1805 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32

Grinding, chopping or pureeing

Grinding, chopping or pureeing
NOTE on material damage
− The device is designed for a short-time operation of 1 minute. After
that, allow the device to cool down for 2 minutes before resuming
operation.
3. Fill the grinding container with the food to be processed.
Note the markings in the container: do not overfill it!
7. Press and hold down the power button until the food in the grinding container
has reached the desired degree of grinding or is pureed. As soon as you release the
button, the motor will stop.
− The degree of grinding depends on the duration of the grinding process.
− Observe the short-time operation of 1 minute.
− The desired result can also be achieved by multiple power on and off cycles
depending on the nature of the ingredients.
18
1. Place the grinder on a clean and flat surface.
2. Place the desired grinding container on the base
station.
− Grinding and chopping of dry foods such as
nuts, coffee and spices: Take the "Duo" grinding
container with the two-bladed knife.
− Mixing and shredding of moist foods such as
herbs: Take the "Quattro" grinding container
with the four-bladed knife.
4. Replace the seal cover on the base station. Note the
position of guide pins on the seal cover and recesses
on the base station.
5. Turn the seal cover counter-clockwise until it stops.
The device is ready to work only if the seal cover is in
this position.
6. Plug the power cord into the mains outlet.
KA 1805 spice and coffee grinder

Publicité

Table des Matières
loading

Table des Matières