Fan Operating Instructions; Power And Settings - Whirlpool WF4235ER1 Guide D'utilisation Et D'entretien

Speed Controls
POWER
0.5
FAN TIMER
Remote Control
Install/Replace Batteries
1. With the buttons of the remote control facing down, remove
the screw from the battery door.
2. Depress the battery door latch and remove.
3. Install/replace 2 AAA batteries.
4

FAN OPERATING INSTRUCTIONS

Power and Settings

TURBO
OSC
TIMER
4
2
1
SPEED
+
-
OSC TURBO
1. Press the power button to turn on the fan.
2. The fan is preset to 3-fan operation when turned on the first
time.
Press FAN 1 time to select upper and lower fan operation.
Press FAN 2 times to select middle and lower fan
operation.
Press FAN 3 times to return to 3-fan operation.
3. Press the Speed "-" or "+" button to adjust the fan speed.
4. Press TURBO to select the highest fan speed with 3-fan
operation.
5. Press OSC to turn on or off oscillation.
6. Press TIMER to set the length of time before the fan turns off
automatically.
Press 1 time for 0.5 hour (30 minutes).
Press again to add 30 minutes.
Continue pressing for up to 7.5 hours.
7. Press OSC to turn on oscillation.
4. Replace battery door.
A. Battery door latch
B. Screw
B
A