Before Using For The First Time; Operation - Exquisit CM 30752 we Mode D'emploi

12 Before using
for the first time
Basic cleaning
Clean the mobile air conditioner and all
individual parts before using for the first
time as described in section "Cleaning"
to remove any packaging dust residues.
Allow the mobile air conditioner to stand
upright for 12 hours before using for the
first time.
In order to remove any production-
related residues, operate the mobile air
conditioner for 1 hour with the window
open.
If odours occur during operation of the
mobile air conditioner, this is normal
and disappears after a short time. It is
not a malfunction. Ventilate sufficiently.
Electrical connection
RISK OF ELECTRIC SHOCK!
A faulty electrical installation or
excessively high mains voltages can
result in electric shocks!
Connect the mobile air conditioner only
→ to a properly
installed plug socket with earthing
contact
→ when the mains power supply of the
plug socket corresponds to the data
on the type plate.

13 Operation

The fan of the air conditioner draws in
room air and blows the cooled air out
again through the refrigeration system.
During this process, the moisture in the
air condenses and is collected in the
internal water tank.
RISK OF DAMAGE!
Improper handling can result in damage
to the mobile air conditioner.
Switching on the mobile air
conditioner
•
Switch the mobile air conditioner on
and off with button "h".
•
The mobile air conditioner starts
automatically.
•
The preset temperature can be seen
on the display (e.g. 22°C).
Setting the room temperature
Set the temperature in °C with buttons
"g" and "f" (TEMP+/TEMP-).
Press button "g" or "f" several times
•
to increase or decrease the
temperature in steps of 1°C (max.
35°C and min.16C).
Remote control
Point the remote control at the signal
receiver "e" of the mobile air
conditioner.
The maximum distance between the
appliance and the remote control is 5
metres.
EN
Page | 25