Télécharger Imprimer la page

Unitec Cartrend Premium 10920 Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4
3
2
• Schutzklasse:
• Schutzart:
• Power source:
• Air hose length:
• Current consumption:
• Weight:
• Max. air pressure:
• Dimensions:
• Running time:
• Break:
• Air inlet and discharge temperatures: Inlet :-10°C-25°C
• Air inlet and discharge pressures:
• Maximum pressure ratio:
• Maximum rotational shaft speed:
12V+
12V-
Always check the object recommended pressure before inflating it.
1) Screw the valva nozzle 1 onto the valve.
2) Plug the 12V adaptor 2 in the 12V DC cigarette lighter socket in your car.
3) Using the ON/OFF switch 3, switch the compressor on.
4) While inflating, keep checking the pressure gauge 4. When you reach the desied
pressure,switch the compressor off.
5) Unscrew the valve nozzle and recheck the pressure using a calibrated pressure gauge.
The adaptors supplied in the package have been designed for various purposes
(e.g. inflating balls, mats, etc.).
1) Choose an appropriate adaptor 5 and screw in onto the valve nozzle 1.
2) Plug the 12V adaptor 2 in the 12V DC cigarette lighter socket in your car.
3) Using the ON/OFF switch 3, switch the compressor on.
4) While inflating, keep checking the pressure gauge 4. When you reach desired
pressure,switch the compressor off.
5) Remove the valve nozzle and the adaptor.
Only clean when disconnected from the electricity supply.
• This electric appliance does not require special maintenance.
• Clean the device using only a slightly moist cloth. Do not use aggressive detergents.
• Store the compressor in dry and dust-free environment.
• The compressor is equipped with permanently lubricated, maintenance-free motor.
Never try to lubricate the compressor
• Repairs may only be carried out by qualified experts.
At the end of its useful life, do not dispose of this product in the domestic
refuse but at a point set up for the return of used electrical devices.
10920-AZ-Kompressor-Premium-CTR-IM-INT-OEF-A5_180426.indd 5
1 Valve nozzle
2 12V DC adaptor
3 ON/OFF switch
4 Pressure gauge
1
5 Adaptors for various inflatables
5
III
IPXO
DC 12 V
ca. 1m
max.10 Ampere
ca. 1.9 kg
10 bar / 150 psi
w 18 x h 15.5 x d 8.5cm
max. 10 min
approx. 10 min
Discharge: 0°C-70°C.
Inlet: Atmospheric pressure
Discharge: 10Bar(1MPa)
10
5000rpm
On/off switch
Motor
Accessories
Technical data
Electric circuit diagram
Use
Inflating car/bicycle types
equipped with Schrader valves
Inflating inflatable objects
Maintenance, cleaning, repairs
and storage
Disposal instructions
02.05.18 16:41

Publicité

loading

Produits Connexes pour Unitec Cartrend Premium 10920