Publicité
Les langues disponibles
Les langues disponibles
D 9800 / BH9800
INSTRUCTION MANUAL
Please carefully read before use.
CONTENT
- 2 remote controlled sockets E27
- 1 remote control
- 1 Battery 12V / 23A
FUNCTION
These remote controlled sockets allows the switching on and off of 2 domestic lighting points
(lamp, ceiling, etc.) operating with a screw bulb (E27 of 60W maximum) without specific
adjustment.
GENERAL INFORMATION
- Use remote controlled sockets indoors only.
- Always turn off power during installation or maintenance of remote controlled sockets
(removed fuse or shut off the electric circuit).
- Let the bulb get colder during at least 10 minutes before any intervention.
- Replace the battery of remote control if the receiver doesn't respond or light indicator on
remote control becomes dim.
- Can cross walls and glass but can be affected by radio waves.
INSTRUCTIONS
Remote control: Use a screwdriver to open the battery compartment, insert the battery supplied
with the product (12V - 23A) with the correct polarity. Screw the compartment.
Remote Socket: Set the remote socket between a bulb and his lamp.
SETTING
The remote control has 2 buttons numbered 1 and 2.
The sockets are numbered. Also, the # 1 button control socket # 1 and # 2 knob controls the
socket 2.
Note: The lamp sockets will remain in the "OFF" mode after a power out, even when power
comes on again
SPECIFICATIONS
- Remote control: 1 x 12V battery (23A)
- Remote control range: 20 meters (unobstructed)
- Radio frequency: 433.92 MHz
- Voltage: 230 V - 50 Hz
- Maximum power sockets: 60 W
- Cap sleeves: Lamp clap & base: E27
Publicité
