Télécharger Imprimer la page
Schwinn MPower Upgrade Guide D'installation
Schwinn MPower Upgrade Guide D'installation

Schwinn MPower Upgrade Guide D'installation

Capteur de puissance

Publicité

Liens rapides

Schwinn® MPower™ Power Upgrade
Installation Guide • Guide d'installation • Installationshandbuch • Guide d'installation
• Installatiehandleiding • Guida di installazione • Guía de instalación • Guia de instalação
1
(1) LR6 (AA)
2
© 2009 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered trademark. Nautilus, Inc. trademarks include NAUTILUS®, BOWFLEX®,
STAIRMASTER®, SCHWINN® and UNIVERSAL® and respective logos. 1-800-NAUTILUS www.nautilus.com. Other trademarks are the property of their respective owners.
Patent Information
003-3298-061509A
Note:
Remarque : Une fois la pile installée, procédez avec la procédure de
Hinweis:
Remarque : Une fois la pile installée, procédez à la connexion des
Opmerking: Voer de apparatuurkoppelingsprocedure opnieuw
Nota:
Nota:
Nota:
This product may be covered by US and Foreign Patents and Patents Pending.
After battery is installed, do the Device Pairing procedure.
Refer to the Owner's Manual.
pairage de l'appareil. Consultez le Guide du propriétaire.
Führen Sie nach dem Einlegen der Batterie eine
Geräteverbindung durch. Informationen hierzu finden Sie
im Benutzerhandbuch.
dispositifs. Référez-vous pour cela au manuel d'utilisation.
uit nadat de batterij is geïnstalleerd. Raadpleeg de
Gebruikershandleiding.
Una volta installata la batteria, attenersi alla procedura di
accoppiamento di dispositivi. Consultare il manuale utente.
Una vez instalada la batería, lleve a cabo el procedimiento
de enlazado de dispositivos. Consulte el Manual del
usuario.
Depois de colocar a pilha, realize o procedimento de
Emparelhamento de dispositivos. Consulte o Manual do
Proprietário.

Publicité

loading

Sommaire des Matières pour Schwinn MPower Upgrade

  • Page 1 © 2009 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered trademark. Nautilus, Inc. trademarks include NAUTILUS®, BOWFLEX®, STAIRMASTER®, SCHWINN® and UNIVERSAL® and respective logos. 1-800-NAUTILUS www.nautilus.com. Other trademarks are the property of their respective owners.
  • Page 2 After the Power Sensor is installed, do the Tilt Calibration, Spin Down Calibration and Base Friction Calibration procedures. Refer to the Owner’s Manual. Une fois le capteur de puissance installé, procédez avec les procédures de calibration de l’inclinaison, de dégyration et de friction de base.