Pioneer GM-D1004 Mode D'emploi page 7

Connecting the units
Connections when using
the RCA input jack
Connect the car stereo RCA output jack and
the RCA input jack of the amplifier.
! Do not connect the speaker to the car
stereo for speaker output while using RCA
input jack.
If the speaker is connected to the car
stereo, since the current consumption of
the whole system becomes large, the
power must be supplied from a car battery
directly.
Four-channel / Three-channel input
! Slide INPUT SELECT (input select) switch
to 4CH position.
3
6
1 INPUT SELECT (input select) switch
2 RCA input cord
To signal input terminal of this unit.
3 RCA front input
4 RCA rear input
1
2
4
5
7
En
Section
03
7