Inserting And Removing The Unit's Battery - Panasonic Lumix DMW-MS1 Manuel D'utilisation

If electrolytes should leak from the battery, wipe away all
traces of the electrolyte in the battery compartment, and then
insert a fresh battery.
If you should get electrolyte on your hands or clothes, rinse it
off thoroughly with water. If you should get electrolyte in your
eyes, you risk losing your sight. In such a case, do not rub
your eyes but immediately wash them with clean water, and
then seek medical advice.
∫ Service life of batteries
Batteries used
AAA Manganese dry batteries
(R03)
AAA Alkaline dry batteries
(LR03)
Operating conditions
• Temperature: 23 °C (73.4 °F)
Note
• The operating time differs slightly depending on the storage
status of the batteries and the operating conditions.
Inserting and Removing the Unit's
Battery
• Check that the unit's power is off. (Make sure the Off/On Mode
Selector Switch is set to [OFF].)
1 Open the battery cover.
Operating time
Approx. 500 h
Approx. 1,000 h
2 When inserting the battery, ensure that the +
• Press the [ ] mark on the cover in the direction of arrow
and slide the cover in the direction of arrow
and - pole of the battery are aligned correctly.
1
.
2
7
VQT2C64