König Electronic GAME-WHEEL11 Mode D'emploi page 3

3. Table Button Functions (PS - PC)
NO PS2/Digital
1 X
2 O
3
4
5 L1
6 L2
7 R1
8 R2
9 START
10 SELECT
11 D-PAD
12 Brake
13 Accelerator
14 LX( )
LX( )
15 MODE
4. Special function description:
1) The cycle mode setting
a. Digital (LED off)
b. When the console is locked in only one mode, the Mode button is not available. The Mode LED
indicates the current mode.
2) KeyMap function without memory
A. Under the NEGCON mode, there is no KeyMap function.
B. Programme sourcing buttons include:
C. The programmable key includes: left/right foot pedals and left/right hand gear stick.
D. KeyMap method:
a. Press and hold SELECT and START for 3 seconds. The green LED will switch on.
b. Press the programmable button. The green LED will start flashing.
c. Press the programme sourcing button. The green LED will swtich off. Programme setup is
finished.
E. Programme clear-up method:
a. Press SELECT and START for 3 seconds. The green LED will switch on.
b. Press the KeyMapped button. The green LED will start flashing.
c. Press the KeyMapped button once more. The green LED will switch off. The KeyMap is
removed.
d. How to remove all programmed buttons: Press SELECT and START for 3 seconds, and then
press the START button for 4 seconds.
3) Sensitivity setup
a. Press SELECT and START for 3 seconds. The green LED will switch on.
b. Press SELECT to display the current sensitivity status.
c. Press SELECT to select the desired sensitivity. It will change according to the following modes:
Centre (green LED flashes)
d. Press up on the D-Pad, and you will exit from the sensitivity setup.
4) Set the foot pedals as the RY axis function
a. Press SELECT and START for 3 seconds. The green LED switches on.
b. Press left on the D-PAD. The green LED switches off and the settings will be activated.
PC PS2/Analog
3 X
2 O
4
1
7 L1
5 L2
8 R1
6 R2
10 START
9 SELECT
X/Y axis D-PAD
Y-
Y+ X
LX( ) LX(127-0)
LX( ) LX(127-255)
MODE MODE
Analog (R-Led on)
, X,
High (green LED flashes quickly)
3
PC PS2/Neg
3 RY (0-255)
2 A
4 LX (0-255)
1 B
7 LY (0-255)
5 LY (0-255)
8 R1
6 R2
10 START
9
POV D-PAD
Y- LX (0-255)
Y+ RY (0-255)
LX (127-0) RX (127-0)
LX (127-255) RX (127-255)
MODE MODE
Negcon (R-Led flashes)
, O, L1, L2, R1, R2
Low (green LED flashes slowly)
PC
Y+
2
Y-
1
8
8
10
POV
Y-
Y+
LX (127-0)
LX (127-255)
MODE