LEXIBOOK K8050 Série Mode D'emploi page 26

CONNECTING AN EXTERNAL DEVICE USING AUX IN
1. Plug one side of the AUX in cable to the AUX jack located at the back of the unit.
2. Plug the other side to the audio out or earphone jack of your audio device.
3. Press the STANDBY/MODE button to select AUX in mode. "AUX" will appear on
the LED screen.
4. Tune the volume control to adjust the volume level as desired.
5. Meanwhile, you can press the MALE/FEMALE/VOICE button on the unit or
ECHO/PITCH to tune your desired tone.
6. You can also connect a guitar or microphone.
7. Please remove the AUX in cable if it is not going to be used for a long time and
switch off the tower speaker.
Note: When the tower speaker is in AUX mode, the PLAY/PAUSE, PREVIOUS and
NEXT buttons on both tower and remote control are disabled.
26