Safety Precautions - Xsense Connectivity GES-4000 Guide D'utilisation

Safety Precautions

1. Follow all warnings and instructions marked on the product.
2. Slots and openings on the device are provided for ventilation.
To protect it from overheating, these openings must not be
blocked or covered.
3. Do not use or store this product in the environment that
exceeds temperature and humidity specifications. Do not
place this product near a radiator or heat register, or in a
built-in installation unless adequate ventilation is provided.
4. Before cleaning, unplug this product from wall outlet. Do not
use liquid cleansers or aerosol cleansers. Use a damp cloth
for cleaning.
5. Do not place cords or cables where they may be walked on
or tripped over.
6. Be sure to comply with any applicable local safety standards
or regulations.
7. The use of any other cables or requirements mandated by
local authority is user 's responsibility.
8. Cables attached to devices in different locations with different
power sources and grounding may cause hazardous voltage.
Consult a qualified electronic consultant before installing the
product to check if this phenomenon exists and, if necessary,
take corrective action.
9. Avoid using telephone equipment or installing the product
during an electrical storm.
10. Never install this product, or any kind of telephone jacks,
lines, network cables, and power connections in wet loca-
tions.
11. Never spill liquid of any kind on the product.
ii