König Electronic KN-HDMIREP15 Mode D'emploi page 3

Connections:
1) HDMI input port
2) Power adapter connection
3) HDMI output port
Connections and Operation:
Before installation, please make sure all devices you wish to connect have been turned off.
• Connect the HDMI input source into the Repeater input port (cables are optional)
• Connect the HDMI device into the Repeater output port.
• Power on all input and output devices.
Warning: If a DVI device does not appear to work, make certain that the device is HDCP compliant.
A non-HDCP compliant DVI device will not work with a signal that has HDCP encoding present
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
from mains and other equipment if a problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
KN-HDMIREP15.indd 3
1 2
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
3
3
2009.8.27 11:07:28 AM