Radio; 3.5 Mm Audio Input; Technical Support - riptunes CD BOOMBOX CDB-204 Manuel De L'utilisateur

RADIO

Radio Reception
An AM and FM antenna is built into the radio. To improve radio reception, adjust the
position of the boombox.
Playing the Radio
Slide the Source Switch switch to AM or FM radio mode.
1.
2. Adjust the Tuning dial to tune the radio.

3.5 MM AUDIO INPUT

Using the Line In
You can use this boombox to play music from any other device, that has a 3.5 mm
output.
Plug one end of a 3.5 mm audio input cable into the Line In input on the back
1.
of the unit, and plug the other end of the cable into the audio output on an MP3
Player or other audio source.
2. Press the Power button to power the unit on.
3. Slide the Source Switch on the front of the unit to Line In.
4. Audio played through the connected device will now be heard through the
speakers.
Note: The 3.5 mm audio input cable required to see the line-in feature is not included.

TECHNICAL SUPPORT

For questions not answered in this manual, or for warranty service, please contact
Riptunes Technical Support:
By phone: 1-888-217-7688 (9:00 AM to 6:00 PM ET)
By e-mail: service@rip-tunes.com
Online: www.rip-tunes.com
© 2016 Riptunes by Impecca, a division of LT Inc., Wilkes Barre, PA.
8