Safety Instructions; Correct Use; Setup And Commissioning - Kerbl 70236 Mode D'emploi

Operating instructions – Heating plate for poultry troughs
EN

Safety instructions

Read the following instructions carefully before using the device. Keep these operating instructions in a safe place.
CAUTION!
Risk of physical injury to people and animals and material damage if used incorrectly!
• Ensure that the device is only used be people who have the professional skills required to do so.
• Keep out of the reach of children and frail people.
• The surface of the heating plate warms up and gets hot.
• Do not place the heating plate on objects or surfaces that are sensitive to heat.
• Ensure that no flammable or easily combustible materials are placed near the heating plate.
• Check the operating voltage specified on the mains plug. Only operate the device at the mains voltage specified.
• If technical data on the underside of the heating plate (type plate) is or becomes illegible, do not use it.
• For the safety of humans, animals and property, the device must only be connected to mains sockets that are fused separately with a
residual current circuit breaker (RCCB).
• Route all electrical supply cables so that they are protected against biting or gnawing. Only use gnaw/bite-proof materials.
• Do not allow electrical supply cables to come into contact with oil or sharp edges.
• Check the function of the heating plate before the first frost.
• Do not use the heating plate if parts of the casing or supply cable are damaged.
• Do not try to repair a damaged supply cable yourself. The supply cable can only be replaced by the manufacturer.
• Do not pull the plug out of the socket using the cable and do not carry the heating plate around by its cable.
• Always remove the mains plug from the socket before moving or cleaning the heating plate.
• Do not immerse in water.
• Note the maintenance and cleaning instructions.

Correct use

The heating plate is used to heat and keep poultry troughs free from frost. Any other use shall be deemed incorrect. In the event of the incorrect
use of, tampering with or modifications to the device, the manufacturer's warranty and liabilities shall be deemed invalid.
Function
The heating plate contains an electric heating conductor that evenly warms up the plastic surface. The heating plate can be used indoors or out
and enables various materials to be warmed up. The stripes on the surface of the heating plate prevent bowls from slipping off.

Setup and commissioning

Proceed as follows:
1. Check the heating plate for damage.
2. Place the heating plate on an even surface.
3. Connect the mains plug to the 230 V power socket. After a short while, the heat can be felt.
4. To switch off the heating plate, pull the plug out of the mains socket.
6