Important - Weka Tabaluga 815 Notice De Montage, D'utilisation Et D'entretien

- en -
Dear customer
Thank you very much for choosing a weka product.
 Read these instructions through completely before assembling your product in order to avoid errors in
assembly or damage.


IMPORTANT

Please use the enclosed packing list to check immediately that your weka product has been
delivered complete and intact.
 Please do not dispose of the packing list before the guarantee period has expired. This list enables you to
check that all the individual parts are present. It should be retained along with the proof of purchase. Any
complaints which may arise can probably be easily rectified with this list. The item numbers on the packing
list do not correspond to the item numbers in the following assembly instructions.
 We recommend that 2 people carry out the assembly.
 In order to prevent accidents, we recommend that children are kept out of the direct vicinity during
assembly.
 We reserve the right to make further technological developments. This means that there many be minor
deviations in the illustrations.
 Please do not simply throw away the packaging material. Paper, card and corrugated board as well as
plastic packaging materials should be placed in the correct collection containers.
Recommendations
 Please drill pilot holes for all screw connections to avoid damaging the wood. The following symbol in the
instructions will indicate when this is necessary:
 The screw connections should be checked and retightened at regular intervals.
INFORMATION
 Wood is a natural product. Varied colouring, knurls and crack formation are normal and have no influence
on the statics.
 Dry cracks may form as a result of extreme weather conditions, especially after long hot periods. These dry
cracks are in no way a defect in quality but are a part of the natural appearance of the wood. Depending on
the weather these cracks may close up again to a minimum. Moreover, these dry cracks, which form
longitudinally in the wood, have no effect on the strength and resilience of the material.

Pressure-treated garden wood which has a very high moisture content after production due to the process
tends to get stains and surface mould during storage. These neither destroy the wood nor affect its
strength. The mould can be removed with a brush, for example, after the wood has dried and weathering
will remove this visual flaw.
Techn. Änderungen vorbehalten!
+
Alle Maßangaben sind ca. Maße.
4
 Copyright HRB 3662