User Manual
COMPATIBILITY
There are three different Elinchrom EL-Skyport flash unit Generations in the market:
1ST GENERATION
•
EL-Skyport Transceiver RX module (Style RX, Digital RX, Ranger RX).
2ND GENERATION
•
Built-in EL-Skyport module Mk1 (BRX, D-Lite RX, Quadra, Quadra Hybrid).
EN
3RD GENERATION
•
Built-in EL-Skyport module Mk2 (ELC and ELB).
This generation offers extended distance range
TRIGGERING
Triggering works with all existing Elinchrom flash units with built-in or plug-in EL-Skyport Transceivers.
REMOTE CONTROL
WHEN ALL OR GROUP 1 - 4 IS SELECTED
•
All Elinchrom flash units with EL-Skyport are supported when changing "PWR±, MOD± or MOD on/off".
When modelling lamp power settings are changed with the MOD on/off or MOD+/- button,the Elinchrom
flash in use will switch to free modelling mode. To return to proportional modelling lamp mode, settings
must be made on the EL flash unit.
•
Some units do not support all modelling features, "--" is then displayed (i.e. for Ranger, Quadra, ELB400).
WHEN A SINGLE UNIT IS SELECTED
•
The selected unit is highlighted with a frame in the display and can be controlled individually.
•
Only Elinchrom flash units with built-in EL-Skyport receivers of the 2nd and 3rd generation are supported.
Note:
1st Generation units are detected, but will show "--" in the display. There is no feedback of the unit settings to
the EL-Syport Transmitter Plus HS, but they will be triggered normally.
FREQUENCY CHANNELS
Some older Elinchrom flash units with EL-Skyport built-in will support Frequency channels 1 to 4 or 1 to 8
(such as BRX, D-Lite RX, Quadra).
The latest Elinchrom flash units with EL-Skyport built-in will support up to 20 different Frequency channels 1 to
20 (ELC, ELB).
8