Technical Data - Marmitek BOOMBOOM 460 Guide Utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19

12 Technical data

General specifications
Supply voltage
Output Power
Range
Frequency response
Dynamic range
Total harmonic distortion (THD+N) 0.04 % @ 10 W, 1 kHz
Speaker Impedance
Idle Power Consumption:
Power efficiency
Channel separation
LED
Antenna
Antenna Gain
Antenna Port Impedance
weight
size (W x D x H)
Operation temperature
Storage temperature
Bluetooth
Bluetooth Frequency
Bluetooth version
Supported Bluetooth profiles:
Supported Codec
Bluetooth Class
aptX
The aptX audio codec is available for high quality stereo audio over Bluetooth.
-Compression ratio:
-Max Data Rates:
-Frequency Response:
-Algorithmic Delay:
-Dynamic Range:
-THD+N:
SBC (subband codec)
when aptX is not available, the BoomBoom 460 will pair down to SBC.
In order to continue improving the product, Marmitek reserves the right to change specifications
and/or designs without prior notice.
8
100-240VAC
12V 4000mA
2 x 20 W (rms)
Up to 10 metres with Class 2 source.
Up to 30 metres with Class 1 source.
20 Hz - 20 kHz
typ. 95 dBA
8 Ohm
< 2W
90%
77 dB
Link
extern, omnidirectional
2 dBi
50 ohm
275 grams
133 x 88 x 45 mm
- 5 - +40°C
-10 - +55°C
2.402GHz~2.480GHz ISM Band
3.0
A2DP
aptX, SBC (sub band codec)
II
4:1
352kbps.
10Hz to 22kHz.
<1.89ms @ Fs 48KHz.
16-bit: >92dB.
-68.8dB
© MARMITEK

Publicité

Table des Matières
loading

Table des Matières