Connecting To The Network - Epson OT-WLO5 Manuel D'utilisation

Connecting the Wireless LAN Unit
Confirm that the printer's power is off, then insert this product into the
printer's USB connector (Type-A).
If it causes interference with other cables or poor transmission, connect via
the USB extension cable as shown in the figure. In that case, attach the
included rubber cover to prevent the product from coming off. Also, use the
included affixing tape to affix the wireless LAN unit.
USB

Connecting to the Network

For how to connect the TM printer to the network with this product, see the
OT-WL05 Technical Reference Guide.
The Technical Reference Guide can be downloaded from the following URL:
http://www.epson-biz.com/?prd=ot-wl05&inf=trg
4