Safety Precautions - König Electronic CMP-EHUB52 Mode D'emploi

How to use the switch
First, plug the Ethernet cable into one of the plugs on the rear of the switch from 1 to 8. Then plug the second Ethernet
cable into another one of the plugs on the rear of the switch. Connection can now be made by Windows/Apple software
on your PC.
LED indicator specifications
LED Color
Power Green
-
Link/Act Green
Orange
-

Safety precautions:

To reduce risk of electric shock, this product should ONLY be opened by an authorized technician
CAUTION
RISK OF ELECTRIC SHOCK when service is required. Disconnect the product from mains and other equipment if a problem
DO NOT OPEN
should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to
incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby
recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should not be mixed
with general household waste. There is a separate collections system for these products.
ENGLISH
Status
ON This indicator lights up when the switch turns on
OFF If this indicator is not lit, check power connection
ON Indicates that the switch is connected at 1000Mbps
Flashing Indicates that the switch is transmitting/receiving data at 1000Mbps
ON Indicates that the switch is connected at 10/100Mbps
Flashing Indicates that the switch is transmitting/receiving data at 10/100 Mbps
OFF Indicates the failed connection
Description
2