ACDelco ARZ1205 Manuel Informations Du Produit page 10

1English1
LOADING THE BATTERIES (ONLY FOR AB642A)
1. Remove the cartridge.
2. Insert four AA batteries, as shown.
3. Loading the cartridge.
Cartridge
Cartridge Base
CAMERA CABLE INSTALLATION INSTRUCTIONS
1. When installing a -camera cable, anchor the lens as shown in the picture and insert
the cable into the connector. Tighten the sleeve until it is stable.
2. To remove the-cable, loosen the sleeve and pull out the cable.
Installation
Orientation Point
English -9