Cooper Lighting Metalux VT3 Instructions D'installation

IB519084EN
Installation Instructions – VT3 LED Vaportight Luminaire Installation
Instructions d'installation – Luminaire DEL étanche à la vapeur VT3
Instrucciones de instalación – Instalación de la luminaria VT3 LED
Vaportight
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product
must be performed by a qualified electrician. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any
maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily injury and property damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may
arise from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
NOTICE: Green ground screw provided in proper location. Do not relocate.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department:
Note actual fixture description of any shortage or noticeable damage on delivery receipt. File claim for common carrier
(LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material,
complete with original packing must be retained.
VT3 Description
The VT3 LED is a Vaportite fixture using a reinforced fiberglass housing with a high impact diffuser. The fixture is suitable
for interior and exterior applications and can be surface or chain mounted. The VT3 LED has been designed for maximum
operation in commercial institutional and industrial environments and is suited for ambient temperatures of -20°C to
25°C, with some models rated to 55C. It is also rated for wet locations and has IP ratings of IP65, IP66, IP67 , and IP69.
WARNING
Metalux