Connection To The Router - BeeWi BEG200 Guide D'utilisation

1.4. Specifications
Radio
Range
Ethernet
Power
Consumption
Dimensions
Weight
LAN cable length
USB cable length
2. INSTALLATION

2.1. Connection to the router

The Gateway requires both USB power source and Ethernet port to connect to the router.
Most of the routers provide both interface but you can also use a standard USB power
adapter (not provided) in case no USB port is available on your router.
1) Plug the USB to micro USB cable to the router's USB port
2) Plug the Gateway's Ethernet cable to one of the router's Ethernet port
3) Connect the USB cable to the Gateway micro-USB port
The Gateway's blue LED will start flashing once every 2 seconds before the green LED
turns on to confirm connection to the server.
2.2. Account setting
Once the Gateway is connected to the server (green LED on), it is possible to create a user
account associated with the Gateway on the server. To do this:
1) Open your web browser and go to www.beewi-home.com
2) Go to "Create an account"
3) Type in all necessary information
Note you will be required to enter the Gateway MAC address and serial number which
can be found on a label on the back of the Gateway.
Once this is done, the home page will be automatically opened and you will see the
Gateway listed on top of it.
2.3. Pairing a peripheral
In order to register a new BeeWi Smart peripheral as part of the www.beewi-home.com
network, it is necessary to pair it securely with the Gateway. To do this, follow these steps:
1) Press the Gateway pairing button: the blue LED flashes twice per second to initiate
pairing.
2) Turn the Smart peripheral in discoverable mode (operation depends on the peripheral,
refer to the user guide). It will be visible for pairing during 30 to 60 seconds.
3) Once the Smart peripheral has been successfully paired with the Gateway, the new
peripheral will show in the web app home screen. It this is not the case, just actualize the
window using the "Actualize" button on the top left.
Bluetooth Low Energy, +10 dBm
Up to 50 meters
100Base10, 100 Mbps
5V typical, Micro-USB connector
1 W typical
Approx. Ø78mm x H22mm (Diameter
x Height)
Approx. 50g
Approx. 50 cm
Approx. 50 cm
5
ENGLISH