Machine Use - WIDMANN MIG/TIG/MMA-160 Manuel Utilisateur

2.6 WELDING FUMES
Make sure ventilation is sufficient. Take special precautions when welding metals
containing lead, cadmium, zinc, mercury or beryllium.
Supply of sufficient clean air can also be ensured with the use of a fresh air mask.

3. MACHINE USE

The machine is delivered ready for operation without adjustments with 0.8 mm
diameter filler wire.
If you use different filler wire, make sure that the feed roll groove welding gun
contact tip and machine polarity are suited for the used wire size and type.
3.1 BEFORE IMPLEMENTATION
The products are packed to durable packages especially designed for them. However,
always make sure before use that products have not been damaged during
transportation. Check also, that you have received the products you ordered and the
instruction manuals needed.
Transportation
The machine should be transported in an upright position.
NOTE! Always move the welding machine by lifting it from the handle.
Never pull it from the welding gun or other cables.
Environment
The machine is suitable for both indoor and outdoor use. But it should be protected
from heavy rain and sunshine. Store the machine in a dry and clean environment and
protect it from sand and dust during use and storage. The recommended operating
temperature range is -20℃ to -40℃.
Place the machine in such a way that it does not come in contact with hot surfaces,
sparks and spatters.
Make sure the air flow in the machine is unrestricted.
3