Safety Requirements - Domo Piet Huysentruyt DO9022M Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

DO9022M
COMPONENTS
A. Speed adjustment
B. Eject button
C. Turbo button
D. Main body
E. Whipping attachments
F. Blender attachment
G. Kneading attachments

SAFETY REQUIREMENTS

Carefully read the instruction manual before use.
Never immerse the motor unit, the power cord or the plug in water or other liquid.
Remove the plug from the socket when the appliance is not in use, or when you
are removing or cleaning components.
Only suitable for indoor, household use.
Do not allow the power cord to hang over the edge of the table or to come in
contact with hot surfaces, such as heaters, etc.
Check that the voltage in your house matches the voltage indicated on the
appliance.
Do not put the plug in the socket if the unit is not fully assembled.
Never use two accessories with different functions (blender attachment and
whipping attachment) at the same time.
The blades on the underside of the blender attachments are razor sharp, be
careful during blending and cleaning. Incorrect use could lead to injuries.
Use the appliance in short bursts. Never use the whipping or kneading
attachments for longer than 1 minute uninterrupted at full power. Allow the
appliance to cool off briefly after this.
Never use the blending attachments in boiling liquids. Allow soup to cool for a
while before blending it.
USE
Clean the appliance thoroughly before using it for the first time. Pay particular
attention to the parts which come in contact with food.
WHIPPING AND KNEADING ATTACHMENTS
Figures 1 & 2
Insert the whipping or kneading attachments into the main body of the appliance
20

Publicité

Table des Matières
loading

Table des Matières