POLO HI-Q TOOLS III Mode D'emploi page 5

EN
USE WITH RUBBERED SWING ARM SUPPORTS
DIRECTLY ON THE SWING ARM
Mount the rubbered swing arm supports and adjust the width of the HI-Q TOOLS mounting stand III on
your two-wheeler. Put the supports from the back on the swing arm bars of the motorcycle and move
the supports so they are completely under both bars. The swing arm bars have to be put onto the
swing arm supports in full width to make sure the motorcycle is carried safely. Generally the swing
arm bars do not have to be positioned strongly angled on the vehicle.
Axle, pieces of the wheel adjustment, shock absorber mountings and other protruding construction
pieces do not have to be put on the swing arm supports to avoid damage on the HI-Q TOOLS moun-
ting stand III or your vehicle. Put the HI-Q TOOLS mounting stand III with the supports on the rear
third of the swing arm bars, so they rest safely on full width. Before lifting the motorcycle make sure
again, that the HI-Q TOOLS mounting stand III is safely assembled and the helping person keeps the
vehicle safely in position. Then press the motorcycle lift on the connection tube strongly but slowly
under the vehicle until it lies on the lift.
USE WITH RACING ADAPTERS DIRECTLY ON THE
SWING ARM
Assemble the racing adapters and adjust the width of the HI-Q TOOL mounting stand III on your
two-wheeler. Put the supports from the back on the premounted adapters of the swing arm and
move the racing adapters so they are coating the adapters from the bottom completely. The swing
arm adapters have to lie entirely on the racing adapters to make sure the motorcycle is supported
safely. Axes, wheel adjustment pieces, shock absorber supports and other protruding construction
pieces may not lie on the racing supports to avoid damage on the HI-Q TOOLS mounting stand III or
on your vehicle. Before lifting the motorcycle make sure again that the HI-Q TOOLS mounting stand
III is safely assembled and the helping person keeps the vehicle safely in position. Then press the
mounting stand on the connection tube strongly but slowly and consistently under the vehicle until
it rests on the stand.
Thus we can guarantee the correct mounting and use of the product.
POLO Motorrad und Sportswear GmbH
41363 Jüchen – www.polo-motorrad.de
03/2018