Setup - Nyrius NY-GS3200 Guide De L'utilisateur

Setting up the Transmitter and Receiver
The transmitter and receiver have a line of sight range of about 400 feet.
Note: Ensure that the On/Off switch is in the OFF position before connection
Transmitter
1. Connect one end of the RCA cable
to the RCA jacks on the back of the
transmitter.
2. Connect the other end of the RCA
cable to the RCA jacks on the media
device you would like to transmit
wirelessly.
3. Connect the adapter to the power
input on the back of the transmitter,
connect the other end of the adapter
to a wall outlet.
4. Point the IR window towards the
media source, you can also use the
external IR extender to control the
direction.
Receiver
1. Connect one end of the RCA cable
to the RCA jacks on the back of the
receiver.
2. Connect the other end of the RCA
cable to the RCA jacks on the back
of your television.
3. Ensure that you keep the IR window
pointed in the direction that you will
be using the remote control.

SETUP

To Media Device
Remote
Control
ID Codes - The ID code must be set
the same on the receiver and the
transmitter.
- 4 -
Transmitter
External IR
Extender
Receiver
To Television