Before First Use - Sage Smart Scoop BCI600 Guide Rapide

OPERATION

BEFORE FIRST USE

Machine preparation
Remove and discard all labelling and packaging
materials attached to your ice cream machine.
Ensure you have removed all parts and
accessories before discarding the packaging.
Remove the lid, ice cream bowl and paddle from
the machine. Clean these parts and accessories
using warm soapy water and rinse thoroughly.
Ensure all parts are completely dry.
FIRST USE
Initial start up
• Place paddle inside the bowl.
• Place ingredients inside the bowl in order
of the recipe.
• Place ice cream bowl into the ice
cream chamber.
• There are 2 grooves in the bowl chamber.
When positioning the bowl, align so that the
bowl handle hinge is positioned within these
grooves.
• Make sure the BOWL CHAMBER and the
exterior of the ice cream bowl is completely
dry before inserting.
8
1. To lock the lid into position, align the lid
handle to the alignment graphic, rotating
clockwise into the LOCK position.
2. Press the POWER button to turn the
machine on.
3. Rotate the hardness selection dial to your
chosen dessert.
Press the START / PAUSE button to begin
the churning process. The elapsed time will
be displayed on the LCD.
4. The smart scoop will beep when your
dessert has reached its desired consistency.